Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in St. Petersburg?
Chimney liner installation in St. Petersburg typically runs $2,400 to $5,800 for a full stainless reline, while a partial chimney rebuild costs $1,800 to $6,500 depending on how much masonry has to come down and go back up. Liner resurfacing with a cast-in-place product like HeatShield usually lands between $1,600 and $3,200. Those ranges hold for most single-family homes here, and the written estimate after an inspection sets your final price.
We’re Citadel Chimney Cleaning, and chimney liners and rebuilds are the two jobs we do most. A clay tile flue that has cracked apart, or a chimney crown that has started to pull away from the stack, is a structural problem in a system that carries fire and exhaust out of your home. Pricing it properly means knowing what’s actually inside the flue before anyone quotes a number.
Key Takeaways
- A full stainless steel reline in St. Petersburg runs about $2,400 to $5,800.
- Cast-in-place liner resurfacing runs about $1,600 to $3,200 and preserves the existing flue footprint.
- A partial chimney rebuild runs about $1,800 to $6,500; a full rebuild from the roofline up can exceed that.
- Liner material, flue size, height above the roof, and how much masonry needs replacing are the big swing factors.
- Estimates are free, and we can work with your insurer on covered damage.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the work breaks down line by line for the St. Petersburg market. Treat these as typical ranges, not a quote. Every chimney has its own dimensions, its own access issues, and its own repair history, and the estimate we write after inspecting yours is the number that counts.
| Line item | Typical cost range | Notes |
|---|---|---|
| Level 2 inspection (camera + video) | $250 – $450 | Required before any reline or rebuild quote |
| Standard sweep | $180 – $320 | Usually bundled with the inspection |
| Cast-in-place liner resurfacing (HeatShield) | $1,600 – $3,200 | Best fit for a sound but cracked or pitted flue |
| Full stainless steel reline (DuraFlex or Olympia Chimney) | $2,400 – $5,800 | Insulated liner, new cap, and top plate included |
| Liner for a wood-burning stove insert | $2,800 – $6,200 | Longer runs and larger diameters push this up |
| Chimney crown rebuild or replacement | $600 – $1,600 | Crown material and square footage drive the range |
| Partial chimney rebuild (above roofline) | $1,800 – $6,500 | Covers brick replacement, new crown, new flashing |
| Full chimney rebuild (from roofline up) | $6,500 – $12,000+ | Rare; usually a badly spalled or leaning stack |
| New chimney cap and spark arrestor | $200 – $600 | Stainless or copper; Famco and Copperfield products |
| Flue tile replacement (individual sections) | $450 – $1,200 | Only viable when the rest of the flue is still sound |
What pushes you toward the top of a range: a flue that needs a larger diameter liner to match a new appliance, a stack that sits well above the roofline and needs scaffolding or a lift, a chimney with multiple flues (each needs its own liner), and masonry that turns out to be softer or more deteriorated than the inspection first suggested. What keeps a job at the low end: a single-flue chimney in good shape, straightforward roof access, and a flue that qualifies for resurfacing instead of a full reline. From inspection to repair, one specialist handles it all, so you’re not coordinating a sweep from one company and a mason from another.
What Affects Chimney Liner & Rebuild Pricing in St. Petersburg
- Liner material and brand. An insulated stainless liner from DuraFlex or Olympia Chimney costs more than a bare uninsulated one, but it’s what keeps the flue gas temperature where it belongs and protects the surrounding wood framing. We use professional-grade chimney brands, not off-the-shelf substitutes, and the material cost is a real line item in every quote.
- Flue size and shape. A round flue relines more easily than a rectangular one, and a flue that’s undersized for the appliance needs a different approach altogether. An ovalized liner solves some of these cases but adds cost.
- Height above the roof. St. Petersburg homes with tall stacks or steep roof pitches need more labor, more staging, and more safety setup. A chimney that’s easy to reach keeps the price down.
- Condition of the masonry. Liner work and rebuild work often meet in the middle. If the brick around the flue is spalling or the crown has failed, that has to be addressed before or alongside the liner, and it’s the single biggest reason a quote comes in higher than expected.
- Number of flues. A chimney serving both a fireplace and a furnace has two flues, and each one is priced separately. This is common in older St. Petersburg homes with more than one heating source.
- Permits. Most cities require a permit for structural chimney work and for certain relining jobs, so ask St. Petersburg’s building department what your project needs. Permit costs vary by scope and are typically listed as a separate line on the estimate.
One local factor worth planning around: our mild winters mean the fireplace gets used in shorter, sharper bursts, often on the handful of cool evenings a year when the house needs real heat. That pattern can hide flue problems longer than a cold-climate schedule would, because the chimney sits idle for months at a time. It also means a pre-season inspection in the fall catches issues before the first fire, not after. Know exactly what’s inside your flue before you light the first fire of the season.
How to Save on Chimney Liner & Rebuild
A few practical ways to keep the number down without cutting corners on the parts that matter.
- Get the inspection first, always. A Level 2 camera inspection tells you whether you need a full reline or whether resurfacing will do. Skipping straight to a reline quote can mean paying for a stainless liner when a cast-in-place repair would have solved the problem for less.
- Bundle the sweep with the inspection. When we’re already on the roof and in the flue for a sweep, the inspection costs less than booking it separately.
- Address the crown before the liner. A failed crown lets water into the masonry, and water is what destroys flues. Fixing the crown early, as its own smaller job, prevents a much larger rebuild later.
- Match the liner to the appliance you actually have. Oversizing a liner for a small stove wastes money and can hurt draft. Sizing it correctly the first time avoids a second job.
- Ask for a written, itemized estimate. You should see the liner material, the cap, the labor, and any masonry work broken out separately. That makes it easy to compare quotes and to see what’s actually driving the price.
- Use free estimates to compare scope, not just price. The cheapest quote is often the one that leaves out the cap, the insulation, or the crown repair. Call (833) 467-4164 to schedule a free estimate and we’ll walk you through the scope line by line.
If you’re a first-time fireplace owner, or you’ve just bought a home with a chimney you’ve never had inspected, start with a full inspection rather than a repair quote. You’ll get a clear picture of what’s sound and what isn’t, and you’ll know exactly which line items you’re choosing between. Home buyers in particular benefit from a specialist inspection before closing, because a generalist home inspector typically notes “chimney present” and moves on.
Liner Resurfacing vs. Full Reline: Which Do You Need?
Cast-in-place resurfacing (HeatShield) is the right call when the flue is structurally sound but has cracks, gaps, or pitting in the clay tiles. It creates a new smooth, sealed lining inside the existing flue, and it costs less than a full stainless reline. A full stainless steel reline (DuraFlex, Olympia Chimney) is what you need when the flue is too damaged to resurface, when the original flue is unlined, when the flue is the wrong size for the appliance, or when there’s no clay liner to work with in the first place. In St. Petersburg’s older housing stock, both situations come up regularly.
Here’s the part that matters for your safety: a damaged or missing liner lets heat and carbon monoxide reach the wood framing and living space around the chimney. That’s not a maintenance issue you can defer. If an inspection turns up a compromised flue, we treat it as a structural safety system and recommend the repair that actually resolves it, not the one that’s easiest to sell.
What Does a Chimney Rebuild Actually Involve?
A chimney rebuild means removing and replacing deteriorated masonry, usually starting at the roofline and working up. The most common version replaces the top several courses of brick, installs a new crown, and redoes the flashing where the chimney meets the roof. A full rebuild, less common, takes the stack down to the roofline and rebuilds from there. Partial rebuilds run $1,800 to $6,500 in this market; full rebuilds go higher.
Rebuilds are usually triggered by spalling brick (brick faces flaking off), a leaning stack, a crown that has cracked through, or flashing that has failed and let water into the masonry for years. The rebuild corrects the structure, and the liner is often addressed in the same project because the flue is exposed once the masonry comes down. That’s one reason we recommend getting both quoted together: coordinating them saves labor and avoids tearing into the same chimney twice.
Because a rebuild involves working at height on the roof, it’s a job for trained professionals with the right staging and fall protection. We don’t walk homeowners through doing this themselves.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in St. Petersburg?
A full stainless steel reline in St. Petersburg typically costs $2,400 to $5,800, and cast-in-place resurfacing runs $1,600 to $3,200. The range depends on flue size, height above the roof, and whether masonry repairs are needed at the same time. Call (833) 467-4164 for a free estimate on your specific chimney.
Is it cheaper to resurface a liner or replace it?
Resurfacing is usually cheaper, typically $1,600 to $3,200 versus $2,400 to $5,800 for a full reline, but only when the existing flue is structurally sound. If the tiles are badly cracked or the flue is unlined, a full stainless reline is the correct fix and resurfacing won’t hold. The inspection determines which one applies. Call (833) 467-4164 to find out which your chimney needs.
How much does a chimney rebuild cost in St. Petersburg?
A partial chimney rebuild above the roofline typically runs $1,800 to $6,500, and a full rebuild from the roofline up can run $6,500 to $12,000+. Spalling brick, a failed crown, and bad flashing are the usual triggers. Call (833) 467-4164 for an itemized estimate.
Can you come today?
Same-day service is often possible for inspections and sweeps, depending on the schedule. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 467-4164 to check availability.
Do I need a permit for chimney liner or rebuild work in St. Petersburg?
Most cities require a permit for structural chimney work, and relining sometimes requires one as well. Ask St. Petersburg’s building department what your specific project needs. We’ll note permit requirements on the written estimate so you know what’s included. Call (833) 467-4164 for a free estimate.
What brands do you use for liners and rebuilds?
We use DuraFlex and Olympia Chimney for stainless liners, HeatShield for cast-in-place resurfacing, and Gelco, Famco, and Copperfield for caps, crowns, and related components. Every one of those is a chimney-industry brand, not a general-building substitute. Our technicians have up to 11 years of experience, and they work only on chimney systems.
Will my homeowner’s insurance cover a chimney rebuild?
Sometimes. Sudden damage from a chimney fire, lightning, or a storm is more likely to be covered than gradual deterioration from a long-term leak or years of deferred maintenance. We can work with your insurer and provide the documentation and photos your claim needs. Call (833) 467-4164 to schedule the inspection that starts the process.
Get a Real Number for Your Chimney
A cost range on a page is a starting point. The number that matters is the one written on the estimate for your chimney, after we’ve put a camera down the flue and looked at the crown, the flashing, and the masonry up close. We do chimney work and nothing else, so your inspection, sweep, and repair all come from the same specialist. No referral runaround, no coordinating two contractors, no guessing whether the mason and the sweep are talking to each other.
If your chimney needs a liner, a rebuild, or just an honest look before the next fire, call (833) 467-4164. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, pricing is upfront, and you’ll know exactly what your chimney needs and what it will cost. You can also read more about our St. Petersburg service and what a visit covers.
Pricing reflects the St. Petersburg market as of 2026. Citadel Chimney Cleaning offers free estimates – call (833) 467-4164.
Written by the team at Citadel Chimney Cleaning.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Yolanda Prince"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Cedric Dawson"Three other companies in St. Petersburg either didn't pick up or wanted to schedule me for the following week. These guys had someone out the next morning."
- Nicole Norris